Activity
From 11/06/2015 to 12/05/2015
12/03/2015
-
05:29 PM Support #456: comparing across waves
- Dear Carolina,
To select the weights you will need to first decide on what you want to represent: either people ov...
12/02/2015
-
03:10 PM Support #459 (Resolved): derived variable for total number of children
- Welcome!
-
02:57 PM Support #459: derived variable for total number of children
- Thank you. This answers my questions.
-
- Hi Alexey,
apologies, it turns out the _lnprnt is asked of men and women who appear not to have any natural children... -
- Hi Gundi,
Many thanks for your detailed and timely reply. Just a couple of things to clarify. You said that lnprnt... -
- Hi Alexey,
first, to confirm that there is no derived variable which provides this information. Hence, you are rig... -
03:03 PM Support #461 (Closed): Was Maternal BMI or Maternal Weigth and Height Data been recorded?
Hi,
I am a research assistant and I am currently searching for maternal datasets containing maternal BMI or ...
12/01/2015
-
05:20 PM Support #460 (Closed): Language variables
- I am interested in exploring the information related to respondents' language in Understanding Society.
It is clea... -
09:08 AM Support #443 (Closed): Orgm variables
-
-
- Thanks for raising it - now forwarded to the BHPS team. On behalf of the team, Jakob
-
- xwhist is under development and did not make it into the latest release. You are advised to apply for access to https...
-
- advised to email biomarker team directly by email today.
-
11/30/2015
-
- Hi,
I'd like to create variables for a total number of biological children for individuals in each wave. My unders... -
09:21 PM Support #458: country of birth and derived variable UK born
- use ukborn in xwavedat
use c_hiqual_dv in c_indresp
c_jlnssec8_dv: is about last job. Information about the las... -
05:35 PM Support #458: country of birth and derived variable UK born
- Hi please could you advise with the following variables. It is similar to the previous request on ethnicity.
We are... -
-
-
03:08 PM Support #446: Childcare analysis
- Thank you for your help on this
-
- Please use the variable c_racel_dv. This question was asked of all adult respondents in wave 1 and after that only of...
-
- I have a query re an output for ethnicity that a colleague has run.
The output below is for ethnicity. There appea... -
11/27/2015
-
04:55 PM Support #456 (Closed): comparing across waves
- Hello,
I wanted to know if it is possible to compare the effect of a variable in wave 1 with its effect in wave 5.
... -
12:48 PM Support #455 (Closed): Residential mobility indicators
- Hello,
I have the latest version (W5 release) of SN6614 and SN7248 and have a question about residential mobility ... -
11:04 AM Support #454 (Closed): BHPS hhch12 variable in INDRESP files
- There is a minor discrepancy between the labelling and text for variable hhch12 in each of the indresp files. An exam...
11/26/2015
-
01:23 PM Support #453: Zero value weight with nurse data combined to blood sample and main sample (w2)
- Olena,
Thanks a lot for your response.
I read the User Guide and several questions on the forum (in particular ...
11/25/2015
-
- Hi Alex,
the online data set documentation includes a brief description of the content of the data files which you a...
11/24/2015
-
09:48 PM Support #449: Sexuality Variable
- Thank you, I have read the imputation of income and other variables section. However, it doesn't say which questionna...
-
- Gaelle,
We indeed expect some people to have 0 weights in nurse cross-sectional dataset. These are mostly TSMs in ... -
- Hi,
I am working on the nurse health assessment data combined to the blood sample data and the full main interview...
11/23/2015
-
- Option 1: Use the w_egoalt file to identify same-sex partners in a household. Specifically, use variables: w_relation...
11/22/2015
-
11:27 PM Support #452 (Closed): identifying same-sex (female-female)partner
- Dear Understanding society team
I'm interested in studying sleep in pregnancy, I'm keen to identify the predictors r...
11/20/2015
-
- Any job related question will be inapplicable for those who do not have a job. Please refer to the specific questions...
-
- Thanks.
I have had a look at income data within indresp on stata and the majority of respondents have said inappl... -
- Adults (16+) are interviewed mostly F2F (with some exceptions). Those who complete F2F interviews are also asked to f...
-
- Ok, but are all the adult self-completion questionnaires done with interviewers face-to-face or over the telephone or...
-
- We follow, in short, individuals and their households over time; https://www.understandingsociety.ac.uk/about/longitu...
-
- Ahhh ok, thanks, so for indresp (i.e. the adult questionnaire) are the people interviewed in wave 1 different to the ...
-
- https://www.understandingsociety.ac.uk/search?q=*sexuor*&t=mainstage_variable
The question was on the adult self-com... -
10:38 AM Support #451: Immigrant and Ethnic Minority Boost sample Wave 6
- We do not yet have complete written documentation, but here is a brief description of the design:
Two new sample c... -
11/19/2015
-
- Thank you. I have just had a look at the descriptions of the waves. However, I cannot find the sexuality variable in ...
-
- Hello,
c_orgm is asked only of those who chose c_org=1. Just replace c_orgm* = 0 if c_org=2.
In case of c_orga... -
- Hello,
Yes, if you combine ccare and ccwork and restrict the analysis to those who had a job last week (jbhas=1|jb... -
-
- https://www.understandingsociety.ac.uk/2015/11/19/wave-5-data
-
12:30 PM Support #451 (Closed): Immigrant and Ethnic Minority Boost sample Wave 6
- Hello,
Is there any written documentation on the sample design for the additional immigrant and ethnic minority b...
11/18/2015
-
12:41 PM Support #448: weights
- And thank you, again, Olena.
Vernon
-
- Vernon,
Thank you for your citations. And yes, you should use psu alone as clusters. This is because you are using...
11/17/2015
-
02:52 PM Support #450 (Closed): subpopulation analysis
- Hi, I need some advice on analyzing a subpopulation of the sample. Specifically I am only analyzing individuals that ...
-
- Thanks again, Olena,
With a fast encroaching penultimate deadline for a thesis, I guess it is too late for me to s... -
- Vernon,
We suggest where possible to use full information on design, including psu, strata and weights. It is poss... -
- In paragraph 5 "(i.e, 1/c_indscub_x)" should read "(i.e., 1/c_indscub_xw). Apologies.
-
- Thank you so much, Olena, for that very detailed and considerate reply!
It is my first attempt at negotiating surv... -
- The various files are described here: https://www.understandingsociety.ac.uk/documentation/mainstage/dataset-document...
11/16/2015
-
- I have just redownloaded it and it works, thank you! When I download the STATA version of the dataset I get the diffe...
-
- When I downloaded the data from UKDS a minute ago it was there(?).
On behalf of the team, Jakob -
- Hi,
I have downloaded understanding society's dataset and have realised the variable c_sexuor which should be in d... -
-
-
-
- Dear Vernon,
Thank you for your question. Your thinking of selecting the weight for your analysis are all correct.... -
- I am looking at data exclusively at Wave C Understanding Society c_indresp.sav. I am planning to employ model based ...
11/10/2015
-
- FYI: There has been a review of the information Understanding Society collects about health, and the lack of informat...
11/09/2015
-
-
-
-
-
-
-
-
-
-
-
-
-
- We expect the Wave 5 launch the third week of Nov - so very soon.
On behalf of the team, Jakob -
- Hello,
Please can you let me know the date of the Wave 5 data release?
Many thanks,
Dharmi -
- I have received the following advice:
You are correct – w_plnowy4 identifies those who moved since the last wave. ...
11/06/2015
-
- Hello,
I would like to use the Understanding Society wave 4 data to assess whether childcare arrangements made to ... -
07:57 AM Support #435: Question relating to " main reason respondent was away from work last week?" in the UK HLS
- Hi Alita,
thanks for your answer.
It's a pity the duration cannot be inferred. I hope this issue could be conside...
Also available in: Atom